Factory Direct! DKGB-1260-12V60AH Gel Battery | Superior Quality & Long-lasting Power

1. Charging efficiency: The usage of imported low resistance raw materials and advanced process help make theinternal resistance smaller and the acceptance ability of small current charging stronger. 2. High and low temperature tolerance: Wide temperature range (lead-acid:-25-50 ℃, and gel:-35-60 ℃), suitablefor indoor and outdoor use in varies environments. 3. Long cycle-life: The design life of lead acid and gel series reach to more than 15 and 18 years respectively, forthe arid is corrosion- resistant. And electrolvte is without risk of stratification by using multiple rare-earth alloy ofindependent intellectual property rights, nanoscale fumed silica imported from Germany as base materials, andelectrolyte of nanometer colloid all by independent research and development. 4. Environment-friendly: Cadmium (Cd), which is poisonous and not easy to recycle, does not exist. Acid leakageof gel electrolvte will not happen. The battery operates in safety and environmental protection. 5. Recovery performance: The adoption of special alloys and lead paste formulations make a low self-dischargerate, good deep discharge tolerance, and strong recover capability.

Model	Voltage	Actual capacity	N.W.	*LWHTotal hight**
DKGB-1240	12v	40ah	11.5kg	195164173mm
DKGB-1250	12v	50ah	14.5kg	227137204mm
DKGB-1260	12v	60ah	18.5kg	326171167mm
DKGB-1265	12v	65ah	19kg	326171167mm
DKGB-1270	12v	70ah	22.5kg	330171215mm
DKGB-1280	12v	80ah	24.5kg	330171215mm
DKGB-1290	12v	90ah	28.5kg	405173231mm
DKGB-12100	12v	100ah	30kg	405173231mm
DKGB-12120	12v	120ah	32kgkg	405173231mm
DKGB-12150	12v	150ah	40.1kg	482171240mm
DKGB-12200	12v	200ah	55.5kg	525240219mm
DKGB-12250	12v	250ah	64.1kg	525268220mm

Lead ingot raw materials

Polar plate process

Electrode welding

Assemble process

Sealing process

Filling process

Charging process

Storage and shipping

Maintenance of gel battery 1. Keep the battery surface clean; Regularly check the connection of the battery or battery rack. 2. Establish daily operation records of batteries and record relevant data in detail for future use. 3. Do not discard discarded batteries after use. Please contact the manufacturer for recycling. 4. During battery storage, the battery shall be recharged regularly as required. Service life of gel battery The service life of the battery has two indicators. One is the floating charge life, that is, the service life when the maximum capacity that the battery can release is not less than 80% of the rated capacity under standard temperature and continuous floating charge conditions. The second is the number of times of 80% deep cycle charging and discharging, that is, the number of times German solar cells with full capacity can be recycled after 80% of the rated capacity is discharged. Generally, engineers and technicians only attach importance to the former and neglect the latter. 80% of the times of deep cycle charging and discharging represents the actual number of times that the battery can be used. In the case of frequent power outages or low quality of mains electricity, when the actual number of times of battery use has exceeded the specified number of cycles of charging and discharging, although the actual use time has not reached the calibrated floating charge life, the battery has actually failed. If it cannot be found in time, it will bring greater potential accidents.