DKWALL-01 WALL MOUNTED LITHIUM BATTERY - We are a leading factory offering durable and efficient lithium batteries. Experience reliable power storage solutions for your needs.
6000+ (80% DoD for effectively lower total of ownership cost)
Recommended Charge Voltage
57.6V
Recommended Charge Current
20.0A
End of discharge voltage
44.0V
Charge
20.0A
40.0A
Standard method
Discharge
50.0A
100.0A
Maximum continuous current
Charge
100.0A
100.0A
Discharge
100.0A
100.0A
Charge
<58.4 V (3.65V/Cell)
BMS Cut-Off Voltage
Discharge
>32.0V (2s) (2.0V/Cell)
Charge
-4 ~ 113 ℉(0~45℃)
Temperature
Discharge
-4 ~ 131 ℉(-20~55℃)
Storage Temperature
23~95 ℉(-5~35℃)
Shipment voltage
≥51.2V
Module Parallel
Up to 4 units
Communication
CAN2.0/RS232/RS485
Case Material
SPPC
Size
480*170*650mm
450*650*235mm
Approx. Weight
49kg
89kg
Charge retention and capacity recovery capability
Standard charge the battery, and then put aside at room temperature for 28d or 55 ℃for7d,Chargeretentionrate≥90%,Recoveryrateofcharge≥90
● Long Cycle Life: 10 times longer cycle life time than lead acid battery. ● Higher Energy density: the energy density of lithium battery pack is 110wh-150wh/kg,and the lead acid is 40wh-70wh/kg,so the weight of lithium battery is only 1/2-1/3 of lead acid battery if the same energy. ● Higher Power Rate: 0.5c-1c continues discharge rate and 2c-5c peak discharge rate ,give much more powerful output current. ● Wider Temperature Range: -20℃~60℃ ● Superior Safety: Use more safer lifepo4 cells,and higher quality BMS,make full protection of the battery pack. Overvoltage protection Overcurrent protection Short circuit protection Overcharge protection Over discharge protection Reverse connection protection Overheating protectionOverload protection